商品概要
JAN:4539770117220
ハンドルバー、ハンドルクランプ、アップスペーサーのキットです。
・シルバーアルマイト仕上げ
・高さ調整:2ポジション(-5/-15mm)
・ハンドル絞り:片側5度
・ハンドル幅調整:696mmから719mm(バーエンド間)
・ハンドルバーサイズ:φ22.2x282mm
・STDケーブル、ホース対応
・STDスイッチハウジング対応(穴加工済み)
・高さ調整用スペーサー付属(10mmX1セット)
・バーエンドキャップ(樹脂/白)付属
・取付けボルト類付属
Japanese Article Number:4539770117220
with Mounting Bolt Handlebar, Bar Clamp Set Handlebar Clamp, Up Spacer Kit
Silver anodized finish
Height Adjustment: 2 Position (-5/-15mm)
Handlebar Aperture: One Side 5-degrees
Handlebar Width Adjustment: from 696mm to 719mm (Between the Bar End)
Handlebar Size: Φ22.2 x 282mm
STD Cable, Hose Correspondence
STD Switch Housing Correspondence (Hole Drilled)
with Spacer for Height Adjustment (10mm x 1 Set)
with Bar End Cap (Plastic/White)
with Mounting Bolt
ハンドルバー、ハンドルクランプ、アップスペーサーのキットです。
・シルバーアルマイト仕上げ
・高さ調整:2ポジション(-5/-15mm)
・ハンドル絞り:片側5度
・ハンドル幅調整:696mmから719mm(バーエンド間)
・ハンドルバーサイズ:φ22.2x282mm
・STDケーブル、ホース対応
・STDスイッチハウジング対応(穴加工済み)
・高さ調整用スペーサー付属(10mmX1セット)
・バーエンドキャップ(樹脂/白)付属
・取付けボルト類付属
Japanese Article Number:4539770117220
with Mounting Bolt Handlebar, Bar Clamp Set Handlebar Clamp, Up Spacer Kit
Silver anodized finish
Height Adjustment: 2 Position (-5/-15mm)
Handlebar Aperture: One Side 5-degrees
Handlebar Width Adjustment: from 696mm to 719mm (Between the Bar End)
Handlebar Size: Φ22.2 x 282mm
STD Cable, Hose Correspondence
STD Switch Housing Correspondence (Hole Drilled)
with Spacer for Height Adjustment (10mm x 1 Set)
with Bar End Cap (Plastic/White)
with Mounting Bolt
商品説明
バイクブロスWEBにて特集記事が掲載されています。
『Ninja250/Ninja400スペシャルパーツ特集』
のページもご覧ください。
There is a featured article on the Bike Bros WEB titled "Ninja250/Ninja400 Special Parts Showcase."
Please visit the page to learn more.
『Ninja250/Ninja400スペシャルパーツ特集』
のページもご覧ください。
There is a featured article on the Bike Bros WEB titled "Ninja250/Ninja400 Special Parts Showcase."
Please visit the page to learn more.