スイングアーム タイプ9 Zephyr1100

  • ¥187,000(税込み)
  • (送料サービス・個別発送)
製品番号
52-73-09
在庫数 : 0
在庫状況:
数量:

商品概要

・アルミ角メインパイプ(80mmX40mm/目の字断面)
・コの字タイプチェーンブロック採用
・レーシングスタンドフック標準装備。
・ピボットベアリング

*STDマフラー、ステップ不可
*RSモデルに装着不可

基本な寸法はスタンダード幅、スタンダード長になります。
トルクロッド受やサス受け位置もスタンダード位置に溶接取付になります。

チェーンガードやインナーフェンダー用の取付ステーはありません。

リペア用 レーシングスタンドフック:43-99-31

ロング加工、ワイド加工、トルクロッド受け/サス受け位置変更など、
セミオーダーにて製作が可能です。
詳しくはFAX、またはお電話にてお問い合わせください。


■スイングアームオーダーシート (PDF)


・Aluminum square main pipe with dimensions of 80mm x 40mm and an "I" shaped cross-section
・Equipped with a chain block in a "C" type configuration
・Includes a racing stand hook as a standard feature
・Features pivot bearings

*Not compatible with standard mufflers or steps
*Not compatible with RS models

The basic dimensions are standard width and standard length.
The torque rod and suspension mounting positions are welded in the standard positions.
There are no mounting brackets for chain guards or inner fenders.

For repairs, racing stand hook product number: 43-99-31.

Customizations such as long modifications, wide modifications, and changes to torque rod and suspension mounting positions can be made through semi-custom orders.
For more information, please contact us via fax or phone.

■ Swing Arm Order Sheet (PDF)

商品説明

OVER製のスイングアームは強度、剛性そしてしなりの3点のバランスが絶妙な状態で調節されて設計
装着することによってコーナリング時の安定感はもちろんのこと、高速等での直進安定性の向上
コーナリングではリアタイヤの接地感などはダイレクトに感じることが出来ように
より一層楽しくそして攻め込んだライディングを楽しむことが可能に。

The OVER Racing has produced swing arm is meticulously designed to achieve a delicate balance between strength, rigidity, and flex.
By installing this swing arm, not only will it enhance the stability during cornering, but it will also improve the straight-line stability at high speeds.
Additionally, it allows for a direct perception of the rear tire's grip and enhances the overall riding experience, making it even more enjoyable and thrilling to push the limits.

商品レビュー